Produse pentru Motoare cu role (8)

Sanadek Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and interior renovation paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted. Pail 4 l - Pail 14 l

Over the years ITALGEAR has gained an extensive experience in the field of industrial gearboxes and complex transmission drives, collaborating, when requested, with the Customer for the optimization of the gears and their kinematics. ITALGEAR’s competence extends both to the production of gears and geared shafts, and to the complete assembly of the entire transmission unit. The production process is fully traced, including control activities, in order to guarantee the conformity of the finished product. Speed reducer manufacturers can therefore exploit ITALGEAR’s technical resources to outsource their production, in whole or in part, and thus rely on a specialized and skilled supplier when market conditions suggest flexibility.

Pennello da radiatore Big in setola bionda naturale,adatto in ambito interno o esterno. misure disponibili 2"-2,5"-3". Disponibile anche in setola grigia o sintetica

Pennello professionale prodotto con resina epossidica antisolvente. Setola naturale mista con setola oro ad altissima assorbenza. Adatto per vernici sintetiche e acriliche. Tenuta colore 40% in più della pura setola o di qualsiasi altra fibra sintetica, e durata all'abrasione quattro volte tanto la setola naturale. Stesura omogenea del colore. Si pulisce facilmente con acqua o solvente a seconda delle vernici usate. Manico anatomico bicomponente plastica/gomma totalmente antisolvente. Ghiera ramata.

I sistemi di controllo Sport Devices, nascono da una esperienza ventennale in applicazioni sala prova motori. Offriamo un prodotto evoluto, aggiornato e flessibile; in grado di adattarsi a professionalità, competenza ed esi- genze dei nostri clienti. Ripetibilità nelle prove, customizzazione hw e sw, compatibilità di sonde ed attuatori, totale espandibilità del sistema. I principi su cui, da sempre, amiamo sviluppare i nostri sistemi dedicati al testing motori. • Interfaccia OBD veicolo, Sonde Lambda e controller • Acquisizione espandibile sino a 112 canali • Azionamenti servocomandati • Interfacce di collegamento • Ingressi termocoppie • Prese comandate • Pinze induttive • Telecomando

Protech Sil P Water-repellent, breathable, pigmented paint based on siloxane resins in water dispersion for painting and renovating civil and industrial buildings, and newly manufactured, for both external and internal facades. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana). Protech Sil P creates a microporous filter that effectively prevents the penetration of water and aggressive solutions without compromising the necessary breathability of masonry. Waterproofing and breathable, protective and decorative finishing, for façades in vintage buildings and monuments, subject to protection by the "cultural heritage" or otherwise. Painting of dehumidifying reinforcement cycles with macroporous plasters. Suitable for media like old and new mineral plasters and for pre-existing emulsion paints, provided they are adherent to the media. The application supports should be adequately prepared: free from fouling, powder, crumbling and non-adhering parts, etc., previously treated with the specific fixative Protech Sil Fix. The product can be applied by brush, roller or spray, in two coats. The maximum dilution with water will be 10-15% of the weight of the product. Apply from 0.25 to 0.35 liters of Protech Sil P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Sanafarbe P Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanafarbe P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and internal and external restoration paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. Sanafarbe P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours. Apply from 0.20 to 0.40 liters of Sanafarbe P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Forniamo banchi a rulli e sistemi di controllo ed acquisizione dati, per sale prova dedicate alla omologazioni veicoli. Cicli WLTP o altre normative, per le quali necessitano sistemi che rispondano a requisiti specifici. Soluzioni su misura, banchi prova a rulli anche in versione attiva (dotati di motori elettrici) per i vari ambiti applicativi, dalla omologazione veicoli alla riproduzione di cicli di guida. Tutti ambiti nei quali necessita una profonda integrazione alle esigenze del cliente, in termini di acquisizione e gestione dei dati, anche finalizzata ad integrazioni di processo. Sviluppato su tecnologia National Instruments, piattaforma Compact-RIO, il nostro sistema di controllo ed acquisizione, si presta perfettamente anche al ricondizionamento di sale prova esistenti.